updraftplus
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/wgsi/public_html/wp-includes/functions.php on line 6114Long story short- Yes you can.<\/p>\n\n\n\n
Both standing seam metal roofs and corrugated metal roofs have secure installation techniques available. In this article, the aim is to tell you a little bit about those techniques and ease any worries you may have about installing solar panels on your metal roofed building. <\/p>\n\n\n\n
Standing seam panels are popularly used in constructions in many different kinds of buildings, both big and large. They\u2019re durable and long lasting, and stand up well to the elements and whatever nature might dish out. <\/p>\n\n\n\n
To attach solar panels to a standing seam roof, solar panels and their racking system are attached via U clamps, more often than not without requiring any kind of holes to be drilled. This is always a positive, of course, as metal roofs are not easily patched. <\/p>\n\n\n\n
Maybe most important of all, solar installations on a standing seam roof are usually a little cheaper, as they are fairly simple and require very little special equipment. <\/p>\n\n\n\n
Corrugated metal roofs are also popular in commercial roof installations. Though they are similar, installation of solar panels on these roofs has to be done in a slightly different way. <\/p>\n\n\n\n
These mountings are universally going to require drilling holes in the roof- there\u2019s no way around that. However, if it is done correctly, your roof will remain waterproof and strong. <\/p>\n\n\n\n
To mount these panels, a small \u201cfoot\u201d has to be mounted over or between the corrugations in the metal, and a rubber bushing will be secured to the bottom to seal the holes created by the mounting, thereby keeping water out. <\/p>\n\n\n\n
Metal tile roofs are also relatively easy to mount solar panels on, though they require specialized equipment. Tile replacement mounts have to be fitted to the roof and swapped out with existing tiles. These tile-replacement mounts have the added bonus of keeping your solar installation completely waterproof so long as the installer fits the replacement tile precisely in the place of the metal tile. <\/p>\n\n\n\n
Some customers worry that solar panels are too heavy to be supported by metal roofs, but most metal roofs are perfectly capable of supporting the weight of solar panels. Keep in mind that solar panels. Every roof needs to be inspected before solar panels are installed, usually by a 3rd party roof inspector to make sure it can withstand the additional weight of solar panels. Keep in mind that solar panels only exert something like 3-4 pounds of weight per square foot, so unless there is something structurally unsound about the roof the inspector will almost certainly sign off on the project. <\/p>\n\n\n\n
In the case of a question with structural integrity, the inspector will make recommendations for what needs to be fixed or updated before the project can go forward. Once those improvements are made, the inspector will come back out and sign off if the fixes are to their satisfaction. In very rare cases, such as with a very old roof, the inspector may recommend a complete replacement. <\/p>\n\n\n\n